Product ID:NARMCO 2054
MSDS Date:07/06/1988
FSC:8305
NIIN:01-088-0056
MSDS Number: BKHWH

BASF STRUCTURAL MATERIALS, INC.

1440 N. KRAEMER BOULEVARD
ANAHEIM, CA 92806

Emergency Phone: (714) 630-9400

Info Phone: (714) 666-4309

Cage: 1HT75

NARMCO MATERIALS INC SUB OF CELANESE CORP

ANAHEIM, CA 92806-1404 US

Telephone: 803-329-8051

Cage: 04622

RESIN, EPOXY RESIN W/AMINE HARDENER

Fraction By Weight: 35%

GLASS FABRIC

Fraction By Weight: 65%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: <0.5%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: SENSITIZATION,
DERMATITIS, REDDENING & IRRITATION. INHALATION/INGESTION: LOW
TOXICITY.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: SENSITIZATION,
DERMATITIS, REDDENING, & IRRITATION. INHALATION/INGESTION: LOW
TOXICITY.
Medical Cond Aggravated by Exposure:SENSITIVITY

First Aid:EYES: FLUSH W/COPIOUS AMOUNTS OF WATER. SKIN: WASH W/COPIOUS
AMOUNTS OF SOAP & WATER. INGESTION: GIVE 2 GLASSES OF WATER &
INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Flash Point:450F
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, FOAM, OR CO2. TREAT AS
CLASS B FIRE.
Fire Fighting Procedures:WATER SHOULD BE USED TO KEEP EXPOSED MATERIAL
COOL. USE WATER SPRAY TO DISPERSE UNIGNITED VAPORS. WEAR
SELF-CONTAINED BREATHING APPARATUS.

Spill Release Procedures:PLACE INTO DISPOSAL CONTAINER.

Handling and Storage Precautions:STORE AT 0F. AVOID STORAGE AT TEMP.
>100F.

Respiratory Protection:WEAR NIOSH APPROVED RESPIRATOR FOR FIBER DUST
EXPOSURE.
Ventilation:PROVIDE APPROPRIATE LOCAL EXHAUST VENTILATION TO CONTROL
EMPLOYEE EXPOSURE.
Protective Gloves:IMPERVIOUS TO EPOXY RESINS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:LONG-SLEEVED CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

Melt/Freeze Pt:M.P/F.P Text:>250F
Solubility in Water:NEGLIGIBLE
Appearance and Odor:RESIN IMPREGNATED WOVEN GLASS FABRIC SOLID
Percent Volatiles by Volume:<0.5%

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS, ALKALIS, AMINES, & MERCAPTANS
Stability Condition to Avoid:TEMPERATURES >100F & HEAT
Hazardous Decomposition Products:CO, CO2, OR OXIDES OF NITROGEN
Conditions to Avoid Polymerization:HEAT, STRONG OXIDIZING AGENTS,
ACIDS, ALKALIES, AMINES & MERCAPTANS

Waste Disposal Methods:INCINERATE OR BURY IN LANDFILL IN ACCORDANCE
W/FEDERAL, STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.